This listing are for 1 pc
Koldlok 1010 Integral Raised Floor Grommet  . The photo are for
referent
what I have instock
General Information .
Effective
installation of cables to minimize any air loss from under raise
floor/wall/ceiling plenum .
KoldLok Integral Raised Floor Grommet PART
No 1010 Code : 46-1000-1010
The KoldLok® Integral raised floor
grommet is ideally designed for new installations and fits into the raised
floor tiles prior to the installation of the cabinets.
When fitted at the edge of a floor tile it
will allow cables to be removed.
Alternatively it can be used to go
around existing cables that come through the centre of a tile where a flush
finish is required,
without the need to disconnect them.
Based on measurements at multiple
data centres, between 50% – 80% of conditioned air is not reaching the air intake
of IT equipment due to unsealed flooring openings.
This lost air, known as bypass airflow,
contributes to IT equipment hot spots,
cooling unit inefficiencies and increasing infrastructure costs.
By sealing cable cut-outs with
KoldLok raised floor grommets you can address this bypass airflow,
so drastically improving the cooling capacity within the data
centre and preventing the detrimental effects bypass airflow has.
Features
KoldLok integral raised floor
grommet
Increases existing cooling unit
capacity
Reduces the need to purchase
additional cooling units
Improves equipment reliability and
extends equipment life
Increases static pressure under the
raised floor and improves cool air delivery through perforated tiles and floor
grates
Facilitates Cold Aisle / Hot Aisle best
practices
Overall dimension are: 11 inch x 8?
inch x 1.6 inch (279mm x 210mm x 41mm
Usable cable opening of 8 inch x 4
inch (203mm x 102mm)